 |
 Dental Products for Export |
|
 |
|
| Acrylizer double walled inside
made of stainless steel painted with attractive stone enamel.
The gap between the walls is fitted with glass wool to minimise
loss of temperature. temperature is controlled by Hydrolic
thermostat from 5 c above ambient to 100 c with sensitivity
06+5c Acrylizer consists machanical German Timer can be set ½
hours to 2 hours, bras Drain plug, two indicator control knob,
on/off switch |
|
|
|
Programmable
Burnout Furnace |
Model: Quartz FUR (R&S) - SPL
Quartz FUR (R&S) is uniquely constructed for long and
hassle free use by using Advanced Powder Metallurgy techniques
for heating coil and Micro Processor based controls. For added
reliability, the coil is embedded in quartz tube which can
take high temperatures up to 1400 degree C.
The operations are performed using Micro Controller based
Temperature Controller and Timer. For added safety, the power
to the heating coil is supplied through Power Relay, which is
configured is Cut-off mode in its natural steady state of
rest.
|
| |
|
| TECHNICAL DATA |
|
| Muffle size |
200x200x200 mm |
| Furnace + Control unit size |
425x365x520/370 mm |
| Weight |
30 kg |
| Nominal voltage |
230 V, 50 Hz, 1 Phase, Stabilized |
| Nominal power |
3000 Watts |
| Maximum temperature withstanding |
1400 degree C |
| Control unit |
Mounted firmly on the furnace |
| Control power |
Less than 50 Watts |
| Maximum muffle temperature |
12 degree C internally set |
| Temperature indication |
4 digits display (actual); 4 digits display (soak point) |
| Soak time indication |
3 digits display |
| Programming |
By front panel key switches |
| Sensor |
K Type |
| Soak time counting |
Downwards |
| Construction |
Fully stainless steel |
 |
|
|
Centrifico
Casting Machine AS |
| For Gold work Emmesco Pattern,
with 4 flasks, 3 credles, fixed weight & 2 crucibles. |
|
|
|
Dental Lab Saw Blades and Frames |
Comfort Grip Frame with 127mm (5")
pinned blades. Made of finest quality high carbon steel 0.18mm
and 0.25mm thicknesses for precise thin cuts. |
|
|
|
| AC, HP-1/2 2800rpm SINGLE speed,
Rating continuous Equipped with Double Ball Bearing With 3
chucks (Buffer, stone & Bur chuck), 2 Imported Ball Bearing
Metal cable arm & its attachment. |
|
|
|
